By offering high-speed satellite internet, Starlink has transformed internet connection in recent years, particularly for rural and isolated places. However, a lot of consumers wish to integrate a mesh system, such as the Netgear Orbi, to improve their WiFi coverage. This tutorial will take you step-by-step through the setup procedure if you’re unsure how to connect Orbi to Starlink for smooth WiFi coverage.
Why Link Starlink to Orbi?
Although Starlink’s basic router has a respectable range, it is devoid of the sophisticated networking features and wide coverage that mesh systems such as Orbi provide. When Orbi and Starlink are combined, you can:
- Increase the coverage of WiFi in more places.
- Get rid of dead zones in your house or place of work.
- Take advantage of improved security features and amended device management.
- Boost the performance and stability of the network.
Requirements for Orbi to Starlink Connection
Make sure you have the following before beginning the setup process:
- A working internet connection via Starlink.
- The router and Starlink terminal (dish).
- An Orbi Mesh WiFi setup from Netgear.
- Since the conventional router does not have an Ethernet port, Starlink customers will need an Ethernet adapter.
- A device that can access the Orbi interface through Orbilogin.com, such as a PC, laptop, or smartphone.
How to Connect Orbi to Starlink: A Comprehensive Guide
1. Purchase a Starlink Ethernet adapter
There is no Ethernet port on Starlink’s basic router. A Starlink Ethernet adaptor is required in order to connect Orbi to Starlink. Here’s how:
- Buy the Starlink Ethernet Adapter from authorized sellers or the company’s official website.
- Connect the adapter to the auxiliary port on the Starlink router.
- Attach the adapter’s Ethernet cable to the WAN port on the Orbi router.
2. Set up the Orbi router.
To configure your Orbi router after the physical connection has been made, take the following actions:
- Turn on the Orbi router and use Ethernet or WiFi to connect it to your PC or laptop.
- Launch a browser and go to Orbilogin.com.
- Enter your admin credentials to log in. The password is usually located on the Orbi device, and the default username is admin.
- Go to Internet settings and choose DHCP (dynamic IP).
- Restart the Orbi router after saving the changes.
3. Get around the Starlink router (recommended but optional)
You may get around the Starlink router by setting Orbi as the primary router and avoiding double NAT, which can lead to network problems. Here’s how:
Users of the Starlink Standard Router:
- In the Starlink app, select Settings > Advanced > Bypass Mode to activate Bypass Mode.
- By doing this, the integrated Starlink router will be turned off, enabling Orbi to control the network.
Users of Starlink Mesh Routers:
- Unfortunately, Bypass Mode is not supported by Starlink’s mesh nodes.
- To prevent network issues in this situation, you must run Orbi in AP (Access Point) Mode.
4. Make Your Orbi Network Better
For optimal results, adjust your settings after Orbi has connected:
- Update Firmware: Use Orbilogin.com to make sure the most recent firmware is installed on your Orbi router and satellites.
- Placement: For best coverage, place the Orbi router in the middle.
- WiFi Band Selection: To maximize speed and connectivity, make use of Orbi’s tri-band capabilities.
- Turn on QoS: To give priority to devices that need faster speeds, turn on Quality of Service (QoS) if you encounter bandwidth problems.
5. Examine Your Internet Connection
To make sure everything is operating as it should:
- Do a speed test to see how well it works.
- To confirm coverage in various locations, move about your house.
- Restart the Orbi and Starlink systems and look for firmware upgrades if problems occur.
Solving Typical Problems
1. Orbi Is Not Using Starlink
- Authenticate that the Ethernet wire is resolutely involved.
- Restart Orbi and Starlink.
- Make sure that Orbi is configured in DHCP (dynamic IP) mode.
2. Poor Coverage or Slow Speeds
- Verify that the Orbi satellites are in the best possible location.
- The Orbi router should be positioned away from metal items and thick walls to minimize interference.
- If not in use, turn off parental controls and QoS as they might slow down speeds.
3. Problems with Double NAT
- If at all feasible, turn on Starlink’s Bypass Mode.
- Make sure to switch Orbi to AP Mode while utilizing Starlink’s mesh.
Final thoughts
You can easily connect Orbi to Starlink by following this tutorial, which will provide more reliable and long-lasting WiFi coverage. By removing dead zones and improving connectivity across your house or place of business, Orbi’s sturdy mesh technology and Starlink’s fast satellite internet offer an exceptional networking experience.
You may debug and improve your Orbi system by going to Orbilogin.com if you run into any problems during setup.