To get the debauched and consistent internet coverage throughout your place setup Orbi wifi router. If you have purchased it and doing the Orbi router setup then you can possibly face some technical error which you can resolve with the help of this blog.
Let start with the setup process
Start by building the connection between the power source, router and your modem. You can configure the setup with the help of Orbi app or you can also use web browser to create the login credentials, for the setup too you need a stable connection and strong enough to complete the process without any error. For the smooth working of the router keep it up-to-date with firmware upgrade.
Troubleshooting the common setup issues
Check the power connection
If there is any problem in the outlet then check it by placing the adapter into other socket, also make sure that there is no power fluctuation. Also examine the adapter if that is working properly or not. Make sure the cable which is used to connect the routers is in good condition and plugged with devices properly. Try plugging out the adapter and after waiting for few second plug it in back.
Internet connection error
Check if your existing router’s network is stagnant then check the functionality of the modem and try to connect it to PC. Connect it properly using ethernet cable. Power off your modem and restart it again and give it sometime to establish the steady connection.
Internet connection error
Check if your existing router’s network is stagnant then check the functionality of the modem and try to connect it to PC. Connect it properly using ethernet cable. Power off your modem and restart it again and give it sometime to establish the steady connection.
Firmware update
You need to keep a regular check on the firmware update because if the you will not fulfil the firmware requirement, then it will obviously affect your router. Check with your modem’s manufacturers site download the update and install the updated version of firmware so that your modem can work properly. You can also check your firmware update by using the web browser and entering your modem’s IP address. Then navigate to the firmware settings and check for new updates and install it. This will increase the compatibility and improve the performance of the router.
Limited wifi coverage
Make sure that router is situated in the centre and near to the existing router. Remove any possibility and error that can interrupt the connection. You can try elevating your router or hang it on the wall to recover the coverage. You can also use Orbi mesh satellites to cover the signal in weak areas and cover it with full wifi signal strength.
Device connection error
If your router is frequently disconnecting then device firmware update is necessary because outdated firmware can cause the dysconnectivity issue. You can try to get the solution by adjusting the channels. You have to visit the router’s wifi settings and change its channel where minimum connection are present.
Reset network settings
The last step which can resolve setup issue is resetting the Orbi router, you will get back to default settings but it will surely resolve the connection and setup issues.
Conclusion
If these troubleshooting steps couldn’t solved your problem then you must get touch with Orbi’s technical support team and find the exact cause and solution for the setup error.